Silicon Image Serial ATA NATIVE ( SATA-150 ) 4 Port RAID PCI Host Controller Card Adapter

Sabrent SBT-SRD4 Silicon Image RAID Native 4-Port SATA/150 PCI Card

GST excluded

Add four SATA RAID Channels with this Sabrent SBT-SRD4 Silicon Image RAID Native 4-Port SATA/150 PCI Card. It features a Silicon Image Si I3114CTU chipset and features four internal SATA connectors!


Native SATA 4Ports RAID !

Add This Reliable and Eye-Pattern Proven 1,500Mbps of Serial ATA 4 Ports and RAID 0, RAID 1, RAID 0+1, RAID 1+S(Mirrored-Sparing) to your system

This PCI Host Adapter can upgrade your desktop computer to have four Serial ATA RAID Channels. It can support Low profile PCI and regular size PCI both. The board provides a 32bit, 33/66 MHz PCI interface on the host side and fully compliant Serial ATA ports on the device side to access Serial ATA Serial ATA storage media such as hard disk drive, ZIP drive, CD-ROM, CD-RW, DVD-ROM.

RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping) and RAID 1+S (Mirrored-Sparing) improve the data performance and provide the data redundancy and rebuilding.


  • Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
  • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
  • Four high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s
  • Hot-plug capability
  • Fully compliant with Serial ATA 1.5G specifications
  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives
  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
  • RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
  • Supports ATAPI commands
  • Supports Spread Spectrum in receiver
  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
  • Compliant with PCI Specification, revision 2.2
  • Integrated PCI DMA engines
  • Four Pin header on board for LED connection
  • 32 bit, 33/66MHz fully compliant PCI host interface
  • Supports Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, Vista, 2003 and Linux, Novell Netware
  • Acts as NON-RAID when not BIOS configured RAID


  • Pentium or equivalent PC with one available 32-Bit PCI slot
  • Windows 98SE / Me / NT4.0 / 2000 / XP / NT 4.0 / Vista, Windows Server 2003, Linux, Novell Netware
  • Windows 7 (Must download driver from Silicon Image Here:


Retail Package Includes:

  • Serial ATA 4 Port RAID PCI Controller Card
  • Drivers on CD
  • Quick Installation guide

Product Details

10 Items

Reviews (0)

No reviews
Product added to wishlist
Product added to compare.
JJBYPC uses "cookies" for maintaining contact with a user through a website session.

A cookie is a small file supplied by our web server and stored by the web browser software on your computer when you access this site.

Cookies allow us to recognize you as an individual as you move from one of our web pages to another.